Latest heat shrink sleeves Tenders | Government heat shrink sleeves Tenders

Corporations/Associations/Others

CTN :45721980

06 Jul, 2026 10.00 Lacs

Pune - Maharashtra

Tender For motor and pump maintenance along with material supply for bhor municipal council - rewinding of different capacity motors, 90 h.p, 60 h.p, 50 h.p, 25 h.p, 12.5 h.p, 10 h.p, 7.5 h.p, 5 h.p, 2 h.p, supply of bearing no. 6318, supply of bearing no.7322, supply of bearing no. 6316, supply of bearing no.7320.13, motor dismantling and repairingand erection, 90 h.p, 60 h.p, 50 h.p, 25 h.p, 12.5 h.p, 10 h.p, 7.5 h.p, 5 h.p, 2 h.p, repairing of 90 hp v.t. pumps -dismantling and repairing and erection of following capacity v.t. pumps with bowl assembly , column pipe ,shaft, bearing ,bushing as par sapplied including all cost of skilled labour, transportation, loading unloading and all applicable taxes (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote), repairing of 60 hp v.t. pumps -dismantling and repairing and erection of following capacity v.t. pumps with bowl assembly , column pipe ,shaft, bearing ,bushing as par sapplied including all cost of skilled labour, transportation, loading unloading and all applicable taxes (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote), supply of various parts for 90 h.p pump stuffing box bronze bushing., supply of various parts for 90 h.p pump gland sleeve s/s material., supply of various parts for 90 h.p pump top bowl repair with providing and welding of m.s. flange heavy duty with required sundry etc., supply of various parts for 90 h.p pump column pipe repair with welding if ribs m.s. flange with machining etc., supply of various parts for 90 h.p pump rubber bush, supply of various parts for 90 h.p pump shaft sleeve s/s material, supply of various parts for 90 h.p pump providing and fixing special strengthening heavy duty nut bolts., supply of various parts for 90 h.p pump rubber packing (chanmpion), supply of various parts for 90 h.p pump neck ring brass., supply of various parts for 90 h.p pump bowl bush rubber., supply of various parts for 90 h.p pump bowl bush brass., supply of various parts for 90 h.p pump impeller., supply of various parts for 90 h.p pump impeller turning, supply of various parts for 90 h.p pump spider bushing, supply of various parts for 90 h.p pump bowl assembly fitting, tafflon gland, supply of various parts for 60 h.p pump stuffing box bronze bushing., supply of various parts for 60 h.p pump gland sleeve s/s material., supply of various parts for 60 h.p pump top bowl repair with providing and welding of m.s. flange heavy duty with required sundry etc., supply of various parts for 60 h.p pump rubber bush, supply of various parts for 60 h.p pump shaft sleeve s/s material, supply of various parts for 60 h.p pump providing and fixing special strengthening heavy duty nut bolts., supply of various parts for 60 h.p pump rubber packing (chanmpion), supply of various parts for 60 h.p pump neck ring brass., supply of various parts for 60 h.p pump bowl bush rubber., supply of various parts for 60 h.p pump bowl bush brass., supply of various parts for 60 h.p pump impeller., supply of various parts for 60 h.p pump impeller qualate., supply of various parts for 60 h.p pump spider bushing, supply of various parts for 60 h.p pump bowl assembly fitting, repairing of starter, rewinding of 90 h.p. starter trasformer capacity with f class copper wire insulation including air drying ,varnishing with dr. bake warmish, backtoling, including all cost of skilled labour, dismantling trasformer transportation , loading, unloading, erection, and giving trial and testing and applicable of all taxes. (old scrap material should tekan by contractor and cost of scrap should deduct and final offer should quote.), rewinding of 60 h.p. starter trasformer capacity with f class copper wire insulation including air drying ,varnishing with dr. bake warmish, backtoling, including all cost of skilled labour, dismantling trasformer transportation , loading, unloading, erection, and giving trial and

Central Government/Public Sector

CTN :45731851

14 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of traction transformer complete with cooling system & accessories like h.t cable along with protection shield in passenger compartment and under frame area, thermostat etc. related protection equipment and with safety chain arrangement including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, equipment mounting and earthing hardware and accessories including oil pump, oil cooling blowers etc. as per clause 4.1 rdso specification (one set per basic unit) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45732009

08 Jul, 2026 NA

Vellore - Tamil Nadu

Tender For flexible insulating pvc sleeve with inner dia 25.8 mm + or -0.5 mm, minimumthickness 0.80mm, black colour. material conforming to is: 11654 para. iii sec-1 of 1988. supply in 50 mtrs rolls. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :44231929

13 Jul, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)

corporations/Associations/Others

CTN :45707328

03 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For procurement of 17a1 dental consumable items - acrylic cold cure powder + liquid, acrylic fullteeth set, acrylic posteriro teeth set of 16, adhesive powder, air rotor hand piece spray, bott, alpine mounted stone for c.a hp/ st. hp, amalam capsules single use, anterior teeth set of 6 upper/lower, applicators tips brushes for bonding agent, arch wire- 032" round can wires ( straight, length), autoclave strip, barb broches n0.15-40, begg's buccal tubes weldable--- oval, beggs t-pins, blue inlay wax, bonding kit ( light cure ), bonding kit ( self cure ), brass lock - pins stege - 1, brass lock - pins stege - 3, brass wire, bristle brush for polishing, buccal tubes ( oval ), buff for polishing - bondable, buttons -rect-curved -1, calcium hydroxide with iodofoam, carbide bur cahp, carborundum disc, coe pack, combifin material set, composite finishing & polishing kit (abrasive, stris & discs), composite material, brown,white,black,yellow, composite placement instruments +, contouring instruments (teflon coated), core formers, dental floss, dental mercury, dental napkin, disposable sleeve cover for opg bite block, disposeble sucction tip, dowel pin, edta gel, elastic rubber rings indian, endo block, endo flass, expansion screw, expansion screw ( conventional ), expansion screw hyrax (size : 9 mm & 11 mm ), extra oral film - { size : 8"x10"} for kodak, system, flouride varnish, foamtray (flouride applicator) size- adult, formacresol, g.p.stick, gold alloy, gold castin wax, gutta percha cutter, hand protaper files, h-file, high hat pins -1, impression compound, investment materials, iodoform powder, iopa x-ray film for kodak system, light tranimiting wedges (010), liquid for electopolishing unit, low friction lig - ties, magic foam cord, mandril for sand paper, mandril for st.h.p., material for temporary gingival, miracle mix (silver reinforced gic), modeling wax, needle no 18 half circle, niti -file .02 taper ( 21mm) no. 15-40, niti -file .02 taper ( 25mm) no., 15-40, niti plugers no.15-40 assorted sizes, pediatric iopa x ray film{iopa size 0} for, kodak system, pesso reamers no.1 to 6, pretrimmed,precontoured,prefestoond s.s, crown, pumic powder, relining gel, relining material/soft reliner for acrylic, rotary protaper files, rotational wedges, rubber cup for ca hp, rubber dam sheets, sand for sandblasting unit, sand paper, sand paper sheets, scaler handpieces, scalertips, seprating medium, silver amalgam alloy, sodium hypocloride, steel valcanite trimmer, sticky wax, tooth preparation kit, topical fluoride gel (apf gel), universal polishing paste for denture, wax carving set, wires can beta - jit wires, zero degree molar teeth set of 16, preadusted edgewise 0.022 mbt kit, container complete no. 22 (plastic box), 8x10 dry view films 125 sht, non absorbable black braided silk surgical, suture on reel non sterile length 25/30 mtr, diametr 3-0, unolock syringe 2.5ml, rvg sleev for x ray(pktt-500), mercury (225gm), etchent jumbo syringed, occlusal film for x ray, fluride gel, fluride application tray, cool temp, metal alloy (white metal), prophylaxis paste, zinc oxide (100gm0, eugenol, 17% edta liquid, fiber splint, fogar solution, skyblue wax

CTN :45738784

10 Jul, 2026 NA

Darjeeling - West Bengal

Tender For supply of packing , ring sealing toroidal , gasket , packing material 765-46-185 , gasket special , bushing sleeve , boot dust moisure seal , gasket765-17-368 , gasket 765-17-369 , gasket 765-17-427 , frame , hose , rubber hose , packing assembly , gasket765-10-385 , retainer packing

CTN :45743856

08 Jul, 2026 NA

Gurgaon - Haryana

Tender For supply of o.f.c. jointing kit for 24 fiber cable 9mm core dia with suitable heat shrink sleeves as per rdso spec np. rdso/spn/tc/68/2014 or latest [ warranty period: 30 months after the date of delivery ] ]

CTN :45454513

03 Jul, 2026 NA

Saran - Bihar

Tender For corrigendum : fire retardant 100 % cotton work wear with following specification, material:100% flame retardant cotton flame retardant treatment, style: jacket and pant (with reflective tape), weight: range of 350 to 450 gsm, colour: blue, closure: a heavy duty brass zipper extending form bottom to top of collar, button: metal, adjustment l button, stitching: lock-stitched with f.r thread, design: (i) jacket- (full sleeve, turn down collar, two chest pockets (left side & right side), pocket has protective flap with and covered metal button, front closing with flap type heavy duty metal zipper, quick releasepress buttons to be provided. (ii). trousers-(the trouser should be provided with two side pockets, metal zipper) standard tested according to en iso 11612: 2008 class a1 plus a2, b1, c1, e3 f1. make: podder trading, udyogi, hicare, leslico or equivalent. note - firm should supply advance sample for feel and appearance before bulk supply to consignee. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45733166

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfb-4.bin no-13 & 14.exmp.06.2026-27.03 description- scrap bronze,phosphorous bronze and other bronze scrap including suspension bearing with or without white metal ,bronze boring drilling (all type of bronze boring mixed with white metal &ferrous boring). our offer:-a) scrap brass miscellaneouswith or without iron attachment. such as:- brass parallal clamp, washar spring lock & bolt, brass material of nickle room, brass nozzle, tubular stay sleeve, swivel clip,arc horns for cgr, slip ring, top bush, bush bottom, broze filters, pg clamp for ohe equipment, brush holder assely, lock pad, brass boring, catenery splice for ohe equipment,, catenery suspention bracket, scrap brass of bmbc, c clamp for l/c, rt hook clamp, adopter for fuel gas, dropper clip, pressure regulator, oxygen regulator, hand cutting blow pipe, housing complete for earthing brush assembly, bush for wco & valve, gravity cock( brass), push type flushing valve, section insulator, catenery ending clamp and other brass miscellaneous bin no-13 & 14. qty = 4792 kgs. loading will be done by purchaser's own arrangement.

CTN :45724320

27 Jul, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of spindle sleeve & dust bushing to rdso drg. no. wd-93061-s-01 alt-1, item- 5 & 1, in assembled condition for sab type irsa-750, material should confirm to rdso spec. no. 19-abr-07 with amndt.no. 3 of september 2016. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Heat Shrink Sleeves Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others